Knife and blade vice

Blade Vice for Hand Sanding

Nordic Edge blade vice, another specialist tool for knifemakers;

All stainless and alu with rectractable blade support for exact the right length.

• 3 bolts for secure clamping of the blade
• Accepts up to 67 mm wide blades
• Blade support extends 220 mm for long blades
• Stainless steel; will not rust and steel dust will not stick to it
• Screw holes for attaching to a bench 
• Steel bar attachment for use in a bench vice

The blade vice is useful when hand sanding a blade:

• Either attach to a bench with a clamp, or use in a bench vice
• Adjust the blade support to length of the blade
• Clamp the ground blade tang in into the blade vice
• Sand one side to final grit before cleaning and covering with masking tape
• Turn blade over and repeat

The blade vice is useful when shaping and sanding a handle;

• Either attach to a bench with a clamp, or use in a bench vice
• push blade support all the way in or turn it around so it sticks out the back
• Clamp blade edge side against the single bolt (right) for the strongest grip (there are 3 bolts, use 2 bolts on the spine side and one on the edge side)
• Use the frame bolt to clamp the stainless steel tube in the position needed for shaping the handle or hand sand the handle